Yealink CP860 - Page 133

Configuring Basic Features
121
Parameters
Permitted Values
Default
Features->Forward& DND->DND->DND Off Code
Phone User Interface:
Menu->Features->DND->Off Code
features.dnd_refuse_code
404, 480 or 486
480
Description:
Configures a return code and reason of SIP response messages when rejecting an
incoming call by DND. A specific reason is displayed on the caller’s phone LCD
screen.
404-No Found
480-Temporarily not available
486-Busy here
If it is set to 486 (Busy here), the caller’s LCD screen will display the reason “Busy
here” when the callee enables DND.
Web User Interface:
Features->General Information->Return Code When DND
Phone User Interface:
None
programablekey.X.type
(X=1-6, 9, 13)
5
0
Description:
Configures a programable key as a DND key on the IP phone.
The digit 5 stands for the key type DND.
For more information on how to configure the programable key, refer to Appendix C:
Configuring Programable Key on page 353.
Web User Interface:
DSSKey->Programable Key->Type
Phone User Interface:
None
To configure a DND key via web user interface:
1. Click on DSSKey->Programable Key.