Administrator’s Guide for CP860 IP conference phones
122
2. In the desired programable key field, select DND from the pull-down list of Type.
3. Click Confirm to accept the change.
To configure the DND feature via web user interface:
1. Click on Features->Forward & DND.
2. In the DND block, mark the desired radio box in the DND Status field.
3. (Optional.) Enter the DND on code in the DND On Code field.
4. (Optional.) Enter the DND off code in the DND Off Code field.
5. Click Confirm to accept the change.
To specify the return code via web user interface:
1. Click on Features->General Information.
To Next Page
Loading...
