Yealink CP860 - Page 149

Configuring Basic Features
137
0
Details of Configuration Parameters:
Parameters
Permitted Values
Default
account.X.session_timer.enable
(X = 1)
0 or 1
0
Description:
Enables or disables the session timer.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), IP phone will send periodic re-INVITE requests to refresh the
session during a call.
Web User Interface:
Account->Advanced->Session Timer
Phone User Interface:
None
account.X.session_timer.expires
(X = 1)
Integer from 30 to 7200
1800
Description:
Configures the IP phone to refresh the session during a call at regular intervals (in
seconds).
If it is set to 1800 (1800s), the IP phone will refresh the session during a call before
1800 seconds.
Example:
account.1.session_timer.expires = 1800
Web User Interface:
Account->Advanced->Session Expires (30~7200s)
Phone User Interface:
None
account.X.session_timer.refresher
(X = 1)
0 or 1
0