Description:
Configures the session timer refresher.
0-UAC
1-UAS
If it is set to 0 (UAC), refreshing the session is performed by the IP phone.
If it is set to 1 (UAS), refreshing the session is performed by a SIP server.
Web User Interface:
Account-> Advanced-> Session Refresher
Phone User Interface:
None
To configure session timer via web user interface:
1. Click on Account->Advanced.
2. Select the desired value from the pull-down list of Session Timer.
3. Enter the desired time interval in the Session Expires (30~7200s) field.
4. Select the desired refresher from the pull-down list of Session Refresher.
5. Click Confirm to accept the change.
To Next Page
Loading...
