Yealink CP860 - Page 305

Configuring Audio Features
293
Codec
Configuration Methods
Priority
RTPmap
iLBC
Configuration Files
Web User Interface
4
106
Procedure
Configuration changes can be performed using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure the codecs to use.
Parameters:
account.X.codec.Y.enable
account.X.codec.Y.payload_type
Configure the priority and rtpmap
for the enabled codec.
Parameters:
account.X.codec.Y.priority
account.X.codec.Y.rtpmap
Configure the display name of the
codec.
Parameter:
account.X.codec.Y.display_name
Configure the ptime.
Parameter:
account.X.ptime
Local
Web User Interface
Configure the codecs and adjust
the priority of the enabled
codecs.
http://<phoneIPAddress>/servlet?
p=account-codec&q=load&acc=
0
Configure the ptime.
Navigate to:
http://<phoneIPAddress>/servlet?
p=account-adv&q=load&acc=0
Details of the Configuration Parameter:
Parameters
Permitted Values
Default
account.X.codec.Y.enable
(X = 1, Y ranges from 1 to 11)
0 or 1
Refer to the
following content