Yealink CP860 - Page 306

Administrator’s Guide for CP860 IP conference phones
294
Parameters
Permitted Values
Default
Description:
Enables or disables the specified codec.
0-Disabled
1-Enabled
When Y=1, the default value is 1;
When Y=2, the default value is 1;
When Y=3, the default value is 0;
When Y=4, the default value is 0;
When Y=5, the default value is 1;
When Y=6, the default value is 1;
When Y=7, the default value is 0;
When Y=8, the default value is 0;
When Y=9, the default value is 0;
When Y=10, the default value is 0;
When Y=11, the default value is 0.
Web User Interface:
Account->Codec
Phone User Interface:
None
account.X.codec.Y.payload_type
(X = 1, Y ranges from 1 to 11)
Refer to the following
content
Refer to the
following content
Description:
Configures the codec.
Permitted Values:
PCMU, PCMA, G729, G722, iLBC, AMR-WB
Configures the codec.
When Y=1, the default value is PCMU;
When Y=2, the default value is PCMA;
When Y=3, the default value is G723_53;
When Y=4, the default value is G723_63;
When Y=5, the default value is G729;
When Y=6, the default value is G722;
When Y=7, the default value is iLBC;
When Y=8, the default value is G726-16;