Yealink CP860 - Page 315

Configuring Audio Features
303
jitter buffer.
Navigate to:
http://<phoneIPAddress>/servl
et?p=settings-voice&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
voice.jib.adaptive
0 or 1
1
Description:
Configures the type of jitter buffer.
0-Fixed
1-Adaptive
Web User Interface:
Settings->Voice->JITTER BUFFER->Type
Phone User Interface:
None
voice.jib.min
Integer from 0 to 400
60
Description:
Configures the minimum delay time (in milliseconds) of jitter buffer.
Note: It works only if the parameter “voice.jib.adaptive” is set to 1 (Adaptive).
Web User Interface:
Settings->Voice->JITTER BUFFER->Min Delay
Phone User Interface:
None
voice.jib.max
Integer from 0 to 400
300
Description:
Configures the maximum delay time (in milliseconds) of jitter buffer.
Note: It works only if the parameter “voice.jib.adaptive” is set to 1 (Adaptive).
Web User Interface:
Settings->Voice->JITTER BUFFER->Max Delay
Phone User Interface:
None
voice.jib.normal
Integer from 0 to 400
120