Yealink CP860 - Page 349

Troubleshooting
337
Parameters
Permitted Values
Default
Configures the IP phone to export log files to a syslog server or the local system.
0-Local
1-Server
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Settings->Configuration->Export System Log
Phone User Interface:
None
syslog.server
IP address or domain name
Blank
Description:
Configures the IP address or domain name of the syslog server when exporting log
to the syslog server.
Example:
syslog.server = 192.168.1.50
The log file will be automatically exported to the syslog server 192.168.1.50.
Note: It works only if the parameter “syslog.mode” is set to 1 (Server). If you
change this parameter, the IP phone will reboot to make the change take effect.
Web User Interface:
Settings->Configuration->Server Name
Phone User Interface:
None
syslog.log_level
Integer from 0 to 6
3
Description:
Configures the detail level of syslog information to be exported.
0: system is unusable
1: action must be taken immediately
2: critical condition
3: error conditions
4: warning conditions
5: normal but significant condition
6: informational
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.