11
MAKE THE PHONE DISCOVERABLE
If you make the YeaLink phone discoverable to other Bluetooth devices, they can scan and find the IP phone.
Before you begin, make sure that the Bluetooth mode is activated.
+ Tap the Bluetooth Icon.
+ Select ON from the OPEN DISCOVER field.
+ Press SAVE.
DELETE THE PAIRED BLUETOOTH DEVICE
You can delete the paired Bluetooth device from the phone. The next time you activate Bluetooth mode, the phone will not
automatically connect to this device.
+ Tap the Bluetooth Icon.
+ Select Paired Bluetooth Device
+ Select OPTIONS > DELETE or DELETE ALL. The phone screen will prompt you whether to delete paired device.
+ Select YES.
DISCONNECT THE BLUETOOTH DEVICE
You can disconnect the paired Bluetooth device from the phone. When you disconnect a Bluetooth device, it remains
paired and you can reconnect it to your phone.
+ Tap the Bluetooth Icon.
+ Select Paired Bluetooth Device.
+ Highlight the connected Bluetooth device and select DISCONNECT.
DEACTIVATE BLUETOOTH MODE
After you deactivate the Bluetooth mode, the Bluetooth device will disconnect from the phone, but it remains paired and
you can reconnect it.
+ Tap the Bluetooth Icon.
+ Select OFF from the Bluetooth field.
+ Select SAVE.
Need support? Connect with us at www.northland.net/support or
Dial 4357 (HELP) or 315-671-6262 to speak to a Northland Training Representative
To Next Page
Loading...
