12
USE YOUR YEALINK PHONE WITH A PC
When connected to the PC, the phone acts as a speaker and microphone during calls.
From your phone, you can manage the audio from calls or media played on your PC.
CONNECTING THE PC TO THE PHONE
+ Connect the phone to a PC using a micro USB cable. (not included)
When the phone is idle the phone screen will look like this:
SET THE PHONE AS PC AUDIO DEVICE VIA PC
+ On your PC: Click START > CONTROL PANEL > SOUND.
+ Click ECHO CANCELLING SPEAKERPHONE (Yealink CP930W Speakerphone) and click SET AS DEFAULT DEVICE.
+ Click MICROPHONE (Yealink CP930W Speakerphone) and click SET AS DEFAULT DEVICE.
+ Click OK.
PLACE CALLS VIA PC
If you have the Accession Communicator Desktop application, you can place calls and the phone acts as a microphone
and speaker.
Before you begin, make sure you have set your phone as the PC audio device.
PROCEDURE
+ Make or answer a call on the installed softphone on your PC.
+ The microphone is automatically activated on your Yealink Speakerphone.
+ End the call on the Softphone.
+ The phone will continue to function as a speaker for the PC.
Need support? Connect with us at www.northland.net/support or
Dial 4357 (HELP) or 315-671-6262 to speak to a Northland Training Representative
To Next Page
Loading...
