The Yealink CPW65 is a CP Wireless Expansion Mic which works as an audio input device for CP965 phone. It
features superior audio technology and supports 360-degree voice pickup range at a radius of up to 10 feet (3
meters) without any wiring troubles.
CPW65 LED InstructionsCPW65 LED Instructions
The CPW65 LED indicator indicates the call, register, and battery’s system status. Mute button LED indicator on
the wireless expansion microphone CPW65:
LED StatusLED Status DescriptionDescription
Solid green The phone enters the dialing screen. The phone is in a call and unmuted.
Fast flashing red The phone is receiving an incoming call.
Solid red The phone is muted.
Fast flashing yellow The CPW65 is in the registration mode.
Slowly flashing
yellow
The CPW65 has registered with the phone, but the CPW65 is out of range. The CPW65
has registered with the phone, but the phone is turned off.
Flashing red and
green alternately
The phone is searching for the CPW65 which has registered with it.
Off The CPW65 is in the idle mode.
Battery LED indicator on the wireless expansion microphone CPW65:
LED StatusLED Status DescriptionDescription
Solid greenfor one second
and then off
The CPW65 is turned on.
Solid greenfor 3 seconds
and then off
The CPW65 is in the idle mode.
Solid green The CPW65 is fully charged.
Solid red The CPW65 is being charged.
Fast flashing red 3 times
and then off
The battery capacity is too low to turn on theCPW65.
Slowly flashing red The battery capacity is less than 10%.
Off
If you tap the mute button, the battery LED indicator on the CPW65 isstill off, it
means the CPW65 is turned off.
Charge the CPW65Charge the CPW65
The phone can power to the USB port, so you can directly charge the CPW65 on the phone.
If it is the first time you use the CPW65, you need to fully charge the CPW65 for normal use. If the CPW65 is not in
To Next Page
Loading...
