Yealink MP54

ProcedureProcedure
1. Select the method according to your device:
VP59/MP58/MP56/MP54/CP965VP59/MP58/MP56/MP54/CP965 MP52MP52
1. Tap the account avatar and go to SettingsSettings > DeviceDevice
settingssettings > BluetoothBluetooth.
2. Long tap the paired device and then select UnpairedUnpaired.
It prompts if you are sure to unpair.
3. Tap OKOK.
1. Go to
> SettingsSettings > Device SettingsDevice Settings
> BluetoothBluetooth.
2. Select the paired device and then
select MoreMore.
3. Select UnpairUnpair.
It prompts if you are sure to
disconnect.
4. Select OKOK.
Enable the Media Audio (CP965&CP960 Only)Enable the Media Audio (CP965&CP960 Only)
You can enable the media audio feature to use the phone as a Bluetooth speaker for your mobile phone or PC.
ProcedureProcedure
1. Tap the account avatar and go to SettingsSettings > Device settingsDevice settings > BluetoothBluetooth.
2. Long tap the connected mobile phone/PC and select DetailsDetails.
3. Enable Media audioMedia audio.
4. Tap OKOK.
Enable/Disable the Phone Audio (CP965&CP960 Only)Enable/Disable the Phone Audio (CP965&CP960 Only)
By default, the phone audio is enabled, so the phone can act as a speaker and microphone for your connected
mobile phone.
The call is made through your mobile phone, but the audio is present on the phone. You can disable it.
ProcedureProcedure
1. Tap the account avatar and go to SettingsSettings > Device settingsDevice settings > BluetoothBluetooth.
2. Long tap the connected mobile phone/PC and select DetailsDetails.
3. Enable Phone audioPhone audio.
4. Tap OKOK.
Wireless NetworkWireless Network
Wireless NetworkWireless Network
User Guide
55
Yealink Teams Phone
User Guide
GoMomentum.com/support | 888.538.3960
55