2
Quick start guide
Note: There are two types of expansion microphones available for the CP960, at extra cost: 1) A set of two wireless microphones
(SKU: CPW90) and 2) a set of two wired microphones (SKU: CPE90).
Assembling the phone
1a. If your network does not support PoE, you must purchase
the PoE adaptor (SKU: YLPOE30) and connect the devices as
shown (using Ethernet)
1b. If your network does not support PoE, you must purchase
the PoE adaptor (SKU: YLPOE30) and connect the devices as
shown (using Wi-Fi)
Note: If your network supports PoE, you can simply connect the Ethernet cable to the CP960. The IP phone should be used with Yealink
original PoE adapter (54 V/0.56 A) only (SKU: YLPOE30). The use of a third-party PoE adaptor may cause the damage to the phone. The
cable should be replaced at once if its jacketing is damaged.
Packaging contents
IP phone
Ethernet cable
(7.5 m CAT5E UTP cable)
Quick start guide
Power over Ethernet (PoE)
adaptor YLPOE30
(must be used if your network
does not support PoE)
PSE
Power
cord
Ethernet cable
(2 m CAT5E FTP cable)
2m
7.5 m
7.5 m
Wi-Fi
Refer to “Wireless network connection” in the “Configuring
your phone” section for more information.
To Next Page
Loading...
