6
Quick start guide
Configuring your phone when there’s no web setup
Network settings:
Tap Settings > Advanced Settings (default password: admin) > Network > WAN Port/VLAN/WebserverType/802.1x/VPN/LLDP/
CDP/NAT to configure the network.
Wireless network connection:
1. Tap Settings on the Home screen
2. Tap Wi-Fi on the Basic Settings block
3. Turn Wi-Fi on. The button turns to green, and the phone will automatically search for available wireless networks in your area
4. Tap an available wireless network from the list of networks
5. If the network is secure, enter its password in the Password field
6. Tap Connect to connect to the wireless network
Account settings:
Tap Settings > Advanced Settings (default password: admin) > Accounts to configure the account
Making calls with your phone
Placing a call
You can place a call by manually entering a phone number, or selecting a contact from the Directory or History.
From the Home screen, do one of the following:
• Tap Dial, enter the phone number and then tap Send.
• Tap Directory/History and then tap a desired entry to dial out.
Answering a call
Tap Answer.
Ending a call
Tap End Call.
Muting and unmuting a call
To mute a call:
Tap Mute on the touch screen or tap during a call. The mute key LED illuminates solid red.
To unmute a call:
Tap Mute on the touch screen or tap again to unmute the call. The mute key LED illuminates solid green.
Holding and resuming a call
To hold a call:
Tap More > Hold during a call.
To resume a call:
Tap More > Resume or tap
Resume
during a call.
Conference calling
To initiate a conference:
7. Tap during a call
8. Tap Call multiple members? Click here>>
9. Enter a phone number and then tap Add members. You can also select a contact
from the Directory or History to join into a conference
10. Repeat step 3 to add more members
11. Tap to call the added members. The members are added to the conference after they answer
To join two calls into a conference call:
Tap
Merge calls
on the Calls screen.
To Next Page
Loading...
