Yealink SIP-T2

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
409
Description
It triggers the busy forward feature to on or off.
Permitted
Values
0-Off
1-On, incoming calls to the account X are forwarded to the destination number (configured by the para-
meter “account.X.busy_fwd.target”) when the callee is busy.
Default
0
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
Web UI
Features > Forward&DND > Forward > AccountX > Busy Forward > On/Off
Phone UI
Menu > Features > Call Forward > AccountX > Busy Forward > Busy Forward
Parameter
account.X.busy_fwd.target
[1]
<MAC>.cfg
Description
It configures the destination number of the busy forward.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 1
(Custom).
Permitted
Values
String within 32 characters
Default
Blank
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
Web UI
Features > Forward&DND > Forward > AccountX > Busy Forward > Target
Phone UI
Menu > Features > Call Forward > AccountX > Busy Forward > Forward to
Parameter
account.X.busy_fwd.on_code
[1]
<MAC>.cfg
Description
It configures the busy forward on code to activate the server-side busy forward feature.
The phone will send the busy forward on code and the pre-configured destination number (configured
by the parameter “account.X.busy_fwd.target”) to the server when you activate the busy forward fea-
ture on the phone.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 1
(Custom).
Permitted
Values
String within 32 characters
Default
Blank
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
Web UI
Features > Forward&DND > Forward > AccountX > Busy Forward > On Code
Phone UI
Menu > Features > Call Forward > AccountX > Busy Forward > On Code
Parameter
account.X.busy_fwd.off_code
[1]
<MAC>.cfg
Description
It configures the busy forward off code to deactivate the server-side busy forward feature.
The phone will send the busy forward off code to the server when you deactivate the busy forward fea-
ture on the phone.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 1
(Custom).
Permitted
String within 32 characters