Yealink SIP-T2

Call Features
410
Values
Default
Blank
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
Web UI
Features > Forward&DND > Forward > AccountX > Busy Forward > Off Code
Phone UI
Menu > Features > Call Forward > AccountX > Busy Forward > Off Code
Parameter
account.X.timeout_fwd.enable
[1]
<MAC>.cfg
Description
It triggers no answer forward feature to on or off.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 1
(Custom).
Permitted
Values
0-Off
1-On, incoming calls to the account X are forwarded to the destination number (configured by the para-
meter “account.X.timeout_fwd.target”) after a period of ring time.
Default
0
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
Web UI
Features > Forward&DND > Forward > AccountX > No Answer Forward > On/Off
Phone UI
Menu > Features > Call Forward > AccountX > No Answer Forward > No Answer Forward
Parameter
account.X.timeout_fwd.target
[1]
<MAC>.cfg
Description
It configures the destination number of the no answer forward.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 1
(Custom).
Permitted
Values
String within 32 characters
Default
Blank
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
Web UI
Features > Forward&DND > Forward > AccountX > No Answer Forward > Target
Phone UI
Menu > Features > Call Forward > AccountX > No Answer Forward > Forward to
Parameter
account.X.timeout_fwd.timeout
[1]
<MAC>.cfg
Description
It configures ring times (N) to wait before forwarding incoming calls.
The incoming calls will be forwarded when not answered after N*M (M is configurable by “phone_set-
ting.ring_duration”) seconds.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled) and “features.fwd_mode” is set to 1
(Custom).
Permitted
Values
Integer from 0 to 20 (determined by “features.forward.no_answer.show_ring_times”)
Default
2
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920