Yealink SIP-T20 - Incoming Intercom Calls

Advanced Phone Features
85
Intercom features you need to know:
Intercom Feature
Description
Accept Intercom
Enable or disable the IP phone to automatically
answer an incoming intercom call.
Intercom Mute
Enable or disable the microphone on the IP phone for
intercom calls.
Intercom Tone
Enable or disable the IP phone to play a warning
tone when it receives an incoming intercom call.
Intercom Barge
Enable or disable the IP phone to automatically
answer an incoming intercom call while there is
already an active call on the phone.
To configure intercom features via phone user interface:
1. Press .
2. Select Features->Intercom.
3. Make the desired changes.
4. Press to accept the change.
These specific parameters are configurable via web user interface at the path
Features->Intercom.
Accept Intercom
You can enable or disable the phone to automatically answer an incoming intercom call.
If Accept Intercom is enabled, the phone automatically answers an incoming intercom
call. If Accept Intercom is disabled, the phone rejects incoming intercom calls and sends
a busy message to the caller. Accept Intercom is enabled by default.
Note
Intercom Mute
You can mute or un-mute the microphone on the phone for intercom calls automatically.
If Intercom Mute is enabled, the microphone is muted for intercom calls. If Intercom
Mute is disabled, the microphone works for intercom calls. Intercom Mute is disabled by
default.
Your administrator can set a delay time before the phone automatically answers
intercom calls. Contact your system administrator for more information.
1. Acpt Intercom:
◄ *Enable ►