Basic Call Features
103
but they cannot hear you.
- Press the EndCall soft key to drop the conference call.
You can use network conference feature on the SIP-T21(P) E2 IP phone to conduct a
conference with multiple participants.
This feature allows you to perform the following:
Join two calls together into a conference call.
Invite another party into an active conference call.
To use this feature, contact your system administrator for the network conference URI in
advance.
To configure network conference via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Select Network Conference from the pull-down list of Conference Type.
4. Enter the conference URI (e.g., conference@example.com) in the Conference URI
field.
5. Click Confirm to accept the change.
To set up a network conference call:
1. Place a call to the first party.
2. Press the Conf soft key to place a new call.