User Guide for the SIP-T21(P) E2 IP Phone
74
For multiple numbers, enter a comma between every two emergency numbers. The
default emergency numbers are 112, 911, 110.
3. Click Confirm to accept the change.
Note
You can enable live dialpad feature on the SIP-T21(P) E2 IP phone, which enables the IP
phone to automatically dial out a phone number without pressing the send key. You can
also configure a delay, and then the phone will dial out the phone number
automatically after the designated period of time.
To enable live dialpad via web user interface:
1. Click on Settings->Preference.
2. Select Enabled from the pull-down list of Live Dialpad.
3. Enter the desired delay time in the Inter Digit Time(1~14s) field.
The default delay time is 4 seconds.
To Next Page
Loading...
