Advanced Phone Features
141
key, the conference call is ended.
You can also press the line key with the solid red LED indicator on phone B to set up a
conference call with the other parties in the active call.
If phone A has more than one call, do the following:
1. Long press the desired line key on phone B.
The list of calls appears on the LCD screen of phone B.
2. Press or to select the active call.
The Cancel, CallPull, NewCall and Barge In soft keys appear when the active call is
highlighted.
3. Press the Barge In soft key to interrupt the active call of phone A.
Party B may hear a warning tone and then set up a conference call with the other
parties of the active call.
4. Press the Hold or the EndCall soft key.
- If any party in the conference call presses the Hold soft key, two-way voice can
be heard between the remaining parties.
- If party A or party B presses the EndCall soft key, the remaining parties are still
connected. If the other party (not the shared line party) presses the EndCall soft
key, the conference call is ended.
Call pull feature allows users to retrieve an existing call from another shared phone that
is in active or public hold status. For example, when there is a call between phone A
and phone C, you can use call pull feature on phone B to retrieve this call from phone A.
Then the call is established between phone B and phone C.
To Next Page
Loading...
Need help?
General