User Guide for the SIP-T21(P) E2 IP Phone
28
3. Enter the domain name or IP address of SNTP server in the NTP Server1 and NTP
Server2 field respectively.
4. Press or , or the Switch soft key to select the desired value from the
Daylight Saving field.
5. Press or , or the Switch soft key to select the desired time zone name from
the Location field.
This field appears only if Daylight Saving field is selected Automatic.
The default time zone name is “China(Beijing)”.
6. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
To configure the time and date manually via phone user interface:
1. Press Menu->Settings->Basic Settings->Time & Date->Manual Settings.
2. Enter the specific date in the Date(YMD) field.
3. Enter the specific time in the Time(HMS) field.
4. Press the Save soft key to accept the change.
The date and time displayed on the LCD screen will change accordingly.
To configure the time and date format via phone user interface:
1. Press Menu->Settings->Basic Settings->Time & Date->Time & Date Format.
2. Press or , or the Switch soft key to select the desired time format (12 Hour
or 24 Hour) from the Time Format field.
3. Press or , or the Switch soft key to select the desired date format from the
Date Format field.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
To Next Page
Loading...
Need help?
General