Customizing Your Phone
43
key.
3. Press or to highlight the desired contact.
4. Press the Option soft key, and then select Delete.
The LCD screen prompts the following warning:
5. Press the OK soft key to confirm the deletion or the Cancel soft key to cancel.
You can also delete all contacts by pressing the Option soft key, and then select
Delete All.
To place a call to a contact from the local directory:
1. Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory
enabled in the directory by default.
If Local Directory is removed from the directory (refer to Directory on page 35),
press Menu->Directory->Local Directory to enter the local directory.
2. Select the desired contact group and then press the Enter soft key.
If the contact is not in any group, select All Contacts and then press the Enter soft
key.
3. Press or to highlight the desired contact.
4. Do one of the following:
- If only one number of the contact is stored in the local directory, press the Send
soft key to dial out the number.
- If multiple numbers of the contact are stored in the local directory, press the
Send soft key to display a list of numbers.
Press or to highlight the desired number.
Press the Send soft key to dial out the number.
To Next Page
Loading...
Need help?
General