Yealink SIP-T21 E2 - Page 72

User Guide for the SIP-T21(P) E2 IP Phone
62
Usage:
 When the transfer mode on DSS key is Blind Transfer, press the DSS key to complete
the blind transfer to the number specified in the Value field.
 When the transfer mode on DSS key is Attended Transfer, press the DSS key to dial
out the number specified in the Value field, and then perform the attended or
semi-attended transfer.
 When the transfer mode on DSS key is New Call, press the DSS key to place a new
call to the number specified in the Value field.
Note
Hold
You can use this key feature to place an active call on hold or retrieve a held call.
Dependencies: Type (Key Event)
Key Type (Hold)
Label (key label displayed on the LCD screen)
Usage:
1. Press the DSS key during an active call to place the call on hold.
2. Press the DSS key again to retrieve the held call.
DND
You can use this key feature to activate or deactivate DND. You can also use this key
feature to access the custom DND screen. For more information, refer to Do Not Disturb
(DND) on page 88.
Dependencies: Type (Key Event)
Key Type (DND)
Label (key label displayed on the LCD screen)
Usage:
When DND is in phone mode:
1. Press the DSS key to activate DND.
2. Press the DSS key again to deactivate DND.
Transfer mode via DSS key is configurable via web user interface at the path
Features->Transfer->Transfer Mode Via Dsskey.
If the Value field is left blank, the DSS key performs the same as the TRANSFER key or the
Tran soft key during a call. For more information, refer to Call Transfer on page 99.