Yealink SIP-T38G User Manual

Customizing Your Phone
41
To place a call from the corporate directory:
1. Press Directory->Remote Phone Book.
2. Select the desired remote group, and then press the Enter soft key to load the
corporate directory.
3. Select the desired contact in the corporate directory.
4. Press the Dial soft key.
In addition, you can enable the phone to present the caller identity stored in the
corporate directory when receiving a call.
To enable the presentation of caller identity stored in the remote phonebook:
1. Click on Phone->Features.
2. Click the “+” sign on the left of the General Information to expand the feature list.
3. Select Enabled from the pull-down list of Match Remote Phone Book.
4. Enter the refresh period of corporate directory in the Load Remote Phone Book
Interval (120~2592000s) field. The default value is 3600 seconds.
5. Click Confirm to accept the change.
You can access the BroadSoft directory through your phone. You can add local contacts
from the BroadSoft directory. You can also dial a contact from the BroadSoft directory.
You can configure your new phone to access up to 6 BroadSoft directories. Contact your
system administrator for the access URL of the BroadSoft directory.
To configure the BroadSoft phonebook via phone user interface:
1. Press Menu->Features->BroadSoft Settings Menu->Broad Soft Dir Settings.
2. Press or , or the Switch soft key to select the desired BroadSoft item from
the BroadSoft Item field.
3. Enter the parameters: display name, server address, port, username and password
in the corresponding fields.
4. Press the Save soft key to accept the change or the Back soft key to cancel.

Yealink SIP-T38G Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	48
Touchscreen	-
Display resolution	480 x 272 pixels
Display number of colors	16.78 million colors
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	4.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g