User Guide SIP-T38G IP Phone
62
To specify emergency numbers via web user interface:
1. Click on Phone->Features.
2. Click the “+” sign on the left of the Phone Lock to expand the feature list.
3. Enter the emergency services number in the Emergency field. For multiple numbers,
enter a "," between each emergency number.
The default emergency numbers are 112, 911 and 110.
4. Click Confirm to accept the change.
You can enable the live dialpad feature on the SIP-T38G IP phone, which enables the IP
phone to automatically dial out the phone number without pressing any other key. You
can also configure a period of time before automatically dialing out the phone number.
To enable the live dialpad via web user interface:
1. Click on Phone->Features.
2. Click the “+” sign on the left of the General Information to expand the feature list.
3. Select Enabled from the pull-down list of Live Dialpad.
4. Enter the desired delay time (0~14s) in the Inter Digit Time (1~14) (seconds) field.
5. Click Confirm to accept the change.
Note
You can dial a hotline number immediately once you lift the handset, press the
speakerphone key or press a line key. You can also configure a period of delay time to
dial out the hotline number, the phone will dial out the hotline number automatically
after the specified delay time.
To configure the hotline number via phone user interface:
1. Press Menu->Features->Hotline.
2. Enter the desired number in the Hotline field.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
