Yealink SIP-T38G User Manual

User Guide SIP-T38G IP Phone
70
4. Press the Save soft key to accept the change or the Back soft key to cancel.
The icon appears on the LCD screen.
You can also configure auto answer via web user interface at the path Account.
Note
You can enable the auto redial feature to redial the phone number automatically when
the called party is busy. You can also configure the times of the auto redial and the time
to wait between redial attempts.
To configure auto redial via phone user interface:
1. Press Menu->Features->Auto Redial.
2. Press or , or the Switch soft key to select Enable from the Auto Redial field.
3. Enter the desired time in the Auto Redial Interval field (the default time interval is
10s).
4. Enter the desired times in the Auto redial times field (the default times are 10).
5. Press the Save soft key to accept the change or the Back soft key to cancel.
You can also configure auto redial via web user interface at the path
Phone->Features->General Information.
The auto answer feature is not applicable to answer another incoming call automatically
when there is an active call on the phone.

Yealink SIP-T38G Specifications

General

Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Keypad number of keys	48
Touchscreen	-
Display resolution	480 x 272 pixels
Display number of colors	16.78 million colors
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723.1, G.726
Bluetooth	No
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	4.6 W
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	204 mm
Width	273 mm
Height	42 mm
Weight	1050 g