Yealink SIP-T38G

User Guide SIP-T38G IP Phone
80
field.
3. Press or , or the Switch soft key to select Enable from the Call Waiting Tone
field.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
You can also configure the call waiting feature via web user interface at the path
Phone->Features->General Information.
You can create a conference with other parties using the phone’s local conference
feature. You can create a conference between an active call and a call on hold (on the
same or another line) by pressing the CONF key or the Conf soft key. The network
conference feature allows you to add and remove specific conference parties.
Note
The SIP-T38G IP phone supports up to 3 parties (including yourself) in a conference call.
This is called Local Conference and is the default method of conference.
To set up a local conference call:
1. Place a call to the first party.
2. Press or the Conf soft key to create a new call
The active call is placed on hold.
The network conference feature is not available on all servers. For more information,
contact your system administrator.