Yealink SIP-T41P

Advanced Phone Features
141
Press , , or the Send soft key.
Phone A will dial the entered number.
When the phone C dials the BLA number “14084588327”, an incoming call will arrive on
the bridged line. The phone A and phone B ring simultaneously and the LED indicators
of the line key on both phone A and phone B will flash green. You can answer the
incoming call on either phone A or phone B but not both.
Do one of the following on phone A or phone B:
- Press , or the Answer soft key on phone A.
Phone B stops ringing. The LED indicator of the line key on the phone A will
illuminate solid green. At the meanwhile, the LED indicator of the line key on the
phone B will illuminate solid red indicating that there is an active call on the phone
A.
- Press , or the Answer soft key on phone B.
Phone A stops ringing. The LED indicator of the line key on the phone B will
illuminate solid green. At the meanwhile, the LED indicator of the line key on the
phone A will illuminate solid red indicating that there is an active call on the phone
B.
To place a call on hold:
1. Press the Hold soft key on phone A when party A and party C are talking.
The line key LEDs on phone A slow flash green and phone B slow flash red when
the bridged line call is placed on hold.
If there is a held call between phone A and phone C, you can retrieve a held call on
either phone A or phone B.
To retrieve the held call on phone A:
1. Press the line key with the slow flashing green LED indicator or the Resume soft key
on phone A.
The conversation between phone A and phone C is retrieved.
To retrieve the held call on phone B:
1. Press the line key with the slow flashing red LED indicator on phone B.
The conversation is established between phone B and phone C, phone A
disconnects the call.