EasyManuals Logo

Yealink SIP-T43U Device Guide

Yealink SIP-T43U
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Yealink BYOD Guide - CAP
550 W. Adams St., Suite 900, Chicago, IL 60661
+1 (866) 629-8200, Option 4
info@inteliquent.com
Inteliquent, We empower communications
help.inteliquent.com
Yealink
®
Bring Your Own (BYOD) Device Guide
If you already have Yealink devices, they may be compatible with the Inteliquent solution. For Yealink, Inteliquent currently
accepts the models listed in the table below. If you already have one of these devices, just follow the instructions to
incorporate it into your service.
Supported Yealink Models
SIP-T33G
SIP-T54W
SIP-T43U
SIP-T57W
SIP-T46U
CP960
SIP-T53W
Before You Begin
In order to configure your devices, specific information is needed. At the time you place your Inteliquent order, please
provide a MAC address for each Yealink device. (The MAC address is listed on the bottom or back of the device). Once we
have that information and your order is complete, Inteliquent will email you activation codes for your Yealink devices. You
will need these towards the end of the instructions below.
Repointing and Activating Yealink Devices
To begin, you will need to factory reset and repoint the devices to the Inteliquent service. Follow the instructions below.
1) Reset the device to factory default settings.
a) For the SIP-T33G, SIP-T43U, SIP-T46U, SIP-T53W and SIP-T54W, press-and-hold OK for at least 6-7 seconds.
b) For the SIP-T57W, press-and-hold the Redial key (right above the Speakerphone key) for at least 6-7 seconds.
c) For the CP960, press-and-hold both Mic Mute buttons simultaneously for at least 6-7 seconds.
d) The phone will promptReset to factory setting?”.
e) Press OK.
f) Enter the admin password. Contact support@voyant.com if you don’t know the password. Press OK to continue.
g) Allow the phone to reset and return to factory settings.
2) Capture the phone’s IP address.
a) For the SIP-T33G, SIP-T43U, SIP-T46U, SIP-T53W and SIP-T54W, press the OK button in the center of the
navigation keys on the phone. This will bring up the Status screen.
b) For the SIP-T57W, touch Menu, then Status.
c) For the CP960, touch Settings, then Network.
d) Write down the numbers as shown in the IPv4: row __________________

Other manuals for Yealink SIP-T43U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T43U and is the answer not in the manual?

Yealink SIP-T43U Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorGray
Wall mountableYes
Sustainability certificatesREACH, RoHS
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Power consumption (typical)2.2 W
Bluetooth version4.1
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP/TFTP/HTTP/HTTPS, IPv6, LLDP/CDP/DHCP VLAN
USB 2.0 ports quantity2
Lines quantity12 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
Voice codecsAGC, AJB, AMR-NB, AMR-WB, G.711Mu, G.711a, G.723.1, G.726, G.729ab, OPUS, PLC, VAD, iLBC
Number of handles included1 pc(s)
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal3.7 \
Display resolution360 x 160 pixels
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth206.2 mm
Width224.9 mm
Height174.9 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals