EasyManuals Logo

Yealink SIP-T46S Quick Reference Guide

Yealink SIP-T46S
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
To configure a speed dial key:
1. Press the Menu soft key when the
phone is idle, and then select:
Features->DSS Keys.
2. Select the desired DSS key, and then
press the Enter soft key.
3. Select Speed Dial from the Type
field, select the desired line from the
Account ID field, enter a label in the
Label field and enter the number in the
Value field.
4. Press the Save soft key to accept the
change.
Speed Dial
Basic Call Features cont...
Yealink SIP-T46S Quick Reference Guide
To use the speed dial key:
Press the speed dial key to dial out the
preset number.
Message waiting indicator on the idle
screen indicates that one or more
voice messages are waiting at the
message center. The power indicator
LED slowly flashes red.
To listen to voice messages:
1. Press or the Connect soft
key.
2. Follow the voice prompts to listen
to your voice messages.
Voice Message
05

Other manuals for Yealink SIP-T46S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T46S and is the answer not in the manual?

Yealink SIP-T46S Specifications

General IconGeneral
ManualYes
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsCNG, G.711Mu, G.711a, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Lines quantity16 lines
Phonebook capacity1000 entries
Number of VoIP accounts16
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal4.3 \
Display resolution480 x 272 pixels
AC adapter input voltage100 - 240 V
AC adapter output current2 A
AC adapter output voltage5 V
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Volume controlDigital
Number of programmable keys10
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth213 mm
Width244 mm
Height185 mm
Package depth255 mm
Package width274 mm
Package height128 mm

Related product manuals