Yealink SIP-T46U Configuration Guide

Home
PBXware
SERVERware
TELCOware
SIPmon
SIPProt
Desktop & Mobile
BRM
UADs
Appliances
EOL
From Bicom Systems Wiki
Contents
1 Introduction
■
2 Video Tutorial
■
3 Requirements
■
3.1 Identifying Phone Model
■
3.2 Phone Firmware
■
3.3 DHCP Server
■
3.4 PBXware Version
■
4 Installation
■
4.1 Power Adapter
■
4.2 Power over Ethernet (PoE)
■
4.3 Find the phone IP address
■
4.4 Reset to Factory Settings
■
5 Registering Phone
■
5.1 Manual Configuration
■
5.2 Auto Provisioning
■
5.3 Using TLS
■
5.4 DNS SRV
■
6 Configure BLF
■
6.1 Extension Settings
■
6.2 Phone Settings
■
7 Additional Configuration Template
■
Introduction

Yealink SIP-T46U Specifications

General

Handset type	Wireless handset
Product type	IP Phone
Product color	Gray
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Expansion module support	Yes
Ethernet LAN (RJ-45) ports	2
Security algorithms	AES, HTTPS, SRTP, TLS
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Front camera	-
AC adapter input voltage	100 - 240 V
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Voice codecs	AGC, AJB, AMR-WB, CNG, G.711, G.722, G.723.1, G.726, G.729ab, VAD, iLBC
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm