Click Account.
■
Enter or set the following details into the respective fields.
■
REQUIRED FIELDS:
Account Active
■
Make sure that the On radio box is selected.
Register Name
■
Enter the PBXware Extension number. Example: 1003
User Name
■
Usually refers to the same number as the Phone Number.
Password
■
The Secret of the Extension as received in the e-mail associated with this Extension.
Example: _%Z4M3*Ts9y7. A password is generated automatically for each newly created
Extension.
Sip Server
■
In the Sip Server field, enter the Hostname.
- Example of a Hostname: bicomsystems.com
Make sure that you replace Hostname from this example with your PBXware Hostname.
■
Make sure that DNS server is configured to automatically route registration request to
■
PBXware which is actually under another domain name. Example: newbicomsystems.com.
Transport
■
Select DNS SRV from the drop-down menu.
Click the Confirm button.
■
You will have to wait some time for the device to reboot. If everything is done as described
■
above, you should have successfully registered your phone to PBXware.
Dial *123 to verify registration.
Auto Provisioning
This section describes how to set UAD settings, create the PBXware Extension, and register the
To Next Page
Loading...
Need help?
General
Weight and Dimensions
