Yealink SIP-T48G Quick Reference Guide

Yealink SIP - T48G Quick Reference Guide
Basic Call Features 04
Redial
Press: to enter the Placed call list,
and then tap the desired entry.
Press: twice when the phone is
idle to dial out the last dialed number.
Call Mute & Un - mute
Press: to mute the microphone
during a call.
Press: again to un - mute the call.
Call Hold & Resume
To place a call on hold:
Press: or tap the Hold soft key
during an active call.
To resume the call, do one of the
following:
If there is only one call on hold, press:
or tap the Resume soft key.
If there is more than one call on hold, tap
the call you want to resume, and then
press: or tap the Resume soft key.
Call Transfer
You can transfer a call in one of the
following ways:
Blind transfer:
1. Press: or tap the Transfer soft
key during an active call. The call is
placed on hold.
2. Enter the number you want to
transfer to.
3. Press: or tap the Transfer soft
key.
Attended Transfer:
1. Press: or tap the Transfer soft
key during an active call. The call is
placed on hold.
2. Enter the number you want to
transfer to, and then press:
3. Press: or tap the Transfer soft
key when the second party answers.
Note: If second party does not want to
accept the call, they must hang up first.
The call will now display Resume on
your handset. Click Resume to recover
the call.

Yealink SIP-T48G Specifications

General

Expansion module support	Yes
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Volume control	-
Display diagonal	7 \
Display resolution	800 x 480 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
AC adapter input voltage	100 - 240 V
Number of handles included	1 pc(s)

Weight and Dimensions

Width	266 mm
Height	185 mm