Yealink SIP-T48G

Basic Call Features cont...
Yealink SIP - T48G Quick Reference Guide
05
Call Forward
To enable Call Forward
1. Press the Menu soft key when the
phone is idle and select Call Control.
2. Select Call Forward then select your
number.
3. Select the desired forward type:
Always Forward ---- Incoming calls
are forwarded unconditionally.
Busy Forward ---- Incoming calls are
forwarded when the phone is
busy.
No Answer Forward ---- Incoming
calls are forwarded if not answered
after a period of time.
4. Use arrow keys to enable
or disable.
5. Use arrow keys to move to
next option.
6. Click OK or Save to accept the
change.
Call Conference
1.Tap the Conference soft key during
an active call. The call is placed on hold.
2. Enter the number of the second party,
and then press the Send soft key.
3. Tap the Conference soft key again
when the second party answers. All
parties are now joined in the
conference.
4. Tap the End Call soft key to
disconnect all parties.
Voice Message
Message waiting indicator on the idle
screen indicates that one or more voice
messages are waiting at the message
center. The power indicator LED slowly
flashes red.
To listen to voice messages:
1. Press:
2. Follow the voice prompts to listen to
your voice messages.
Note: Ensure the voice mail code is
already configured on the phone.