Yealink SIP-T54W Auto Provisioning Guide

Yealink IP Phones Auto Provisioning Guide
22
The following figure shows a portion of the MAC-Oriented CFG file:
The following table lists guidelines you need to know when editing the MAC-Oriented CFG file:
Item
Guidelines
#
The line beginning with “#” is considered to be a comment.
#!version:1.0.0.1
It must be placed in the first line.
Do not edit and delete.
Filename
The filename matches the MAC address of your phone.
Line formats and
Rules
Each line must use the following format and adhere to the following
rules:
Configuration Parameter = Valid Value
 Separate each configuration parameter and value with an equal
sign.
 Set only one configuration parameter per line.
 Put the configuration parameter and value on the same line, and
do not break the line.
 The [$MODEL] can be added to the front of configuration
parameter to specify the value for specific phone groups.
$MODEL represents the phone model. The valid phone models
are: VP59, T58, CP960, T54W, T54S, T53W, T53, T52S, T48G,
T48S, T46G, T46S, T42G, T42S, T41P, T41S, T40P, T40G, T29G,
T27G, T23P, T23G, T21P_E2, T19P_E2 and CP920. Multiple phone
models are separated by commas. For example, [T46S, T23G]. It
is only applicable to IP phones (except
W53P/W60P/CP930W-Base) running firmware version 83 or
later.

Yealink SIP-T54W Specifications

General

Connectivity	Dual-port Gigabit Ethernet
SIP Accounts	16
Opus Codec Support	Yes
Audio Features	HD voice with Yealink Acoustic Shield technology
Expansion Module	Supports up to 3 EXP50 expansion modules
Power over Ethernet (PoE)	Yes
Headset Support	Yes, RJ9 headset port, USB headset support, Bluetooth headset support
Resolution	480 x 272 pixels
Bluetooth	Yes, Bluetooth 4.2
USB Ports	2 (USB 2.0)