Yealink SIP-T58W Quick Reference Guide

VIEW ACTIVE CALLS
When you have more than one active call, tap Calls to display all.
CONTROL VIDEO DURING A CALL
Change the video view
Tap  to display the video on full screen.
Tap  to display video in the call control panel.
Turn video view on/off during a call
Swipe down from the top of the screen to open the control center.
Tap Video to toggle video from phone camera on/off.
HOLD AND RESUME CALLS
Place a call on hold
Press the Hold button or soft key during an active
call. The line soft key controlling the call will indicate
the is on hold.
Resume a held call
Press the line soft key controlling the call or the
Resume soft key.
VOICEMAIL
Set up voicemail
If voicemail is available for your extension, the system will
walk you through your voicemail setup the first time you
press the  button.
Check voicemail from your phone
Once you have set up your voicemail, press the  button
and follow the prompts.
For full user guides and video tutorials, visit help.ena.com and select ENA SmartVoice
Note: The Yealink T58W and T58W Pro are the same phone.
The Pro includes the optional Yealink Bluetooth handset,
BTH58, instead of the corded handset.
NAVIGATE THE TOUCH SCREEN
Swipe left or right to switch between home and widget screens. Swipe down
from the top of the screen to open the control and notification center.
Phone dialer - tap to view the active dialpad.
Directory - tap to view your Directory.
History - tap to view Call History.
PLACE VOICE/VIDEO CALLS
Using the handset
Dial the number you are calling, then pick up the handset.
Note: You may place a call by picking up the handset before
dialing. Just be aware the system will attempt to complete the
call after a slight pause in entering digits on the dialpad.
Using the speakerphone
With the handset in the cradle, dial the number
you are calling, then press  or the Send
soft key.
ANSWER CALLS
Using the handset
When a call comes in, pick up the handset.
Using the speakerphone
When a call comes in, press  or the Answer soft key.
Answer a second call
When a second call comes in, press the Answer soft key in the Second Call
Window. The active call is automatically placed on hold.
USB camera must
be installed for video
features to work
Quick Reference Guide
Yealink SIP-T58W and T58W-Pro

Yealink SIP-T58W Specifications

General

Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Wall mountable	Yes
Video call	No
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	4.2
Security algorithms	256-bit AES, HTTPS, TLS, WPA2, WPA3
Networking standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	IPv4/IPv6, SIP v1 (RFC2543), v2 (RFC3261), UDP/TCP/DNS-SRV (RFC 3263)
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
USB 2.0 ports quantity	2
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	12
Keypad number of keys	27
Number of function keys	7
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Number of handles included	1 pc(s)
Voice codecs	G.711a, G.722, G.723.1, G.726, G.729, G.729A, G.729B, iLBC

Weight and Dimensions

Depth	220 mm
Width	259.4 mm
Height	215 mm
Weight	8858 g
Package depth	293 mm
Package width	324 mm
Package height	128 mm
Package weight	9556 g