Yealink T19P

Appendix
77
Parameter
Permitted
Values
Descriptions
Web Setting Path
auto_provision
.power_on =
0 or 1
It enables or disables the phone to
perform an auto provisioning process
when powered on.
0-Disabled
1-Enabled
The default value is 1.
Note: The old parameter
“auto_provision.mode” is also
applicable to IP phones.
Settings->Auto
Provision->Power
On
auto_provision
.pnp_enable
=
0 or 1
It enables or disables Plug and Play
feature. If it is enabled, the phone will
broadcast PnP SUBSCRIBE messages
to obtain a provisioning server
address after startup.
0-Disabled
1-Enabled
The default value is 1.
Settings->Auto
Provision->PNP
Active
auto_provision
.weekly.enabl
e =
0 or 1
It enables or disables the phone to
check new configuration weekly.
0-Disabled
1-Enabled
The default value is 0.
Settings->Auto
provision->Weekly
auto_provision
.weekly.dayof
week =
0,1,2,3,4,5,6
or a
combination
of these
digits
It configures the days of the week for
the phone to check new configuration
weekly.
0-Sunday
1-Monday
2-Tuesday
3-Wednesday
4-Thursday
5-Friday
6-Saturday
Example:
auto_provision.weekly.dayofweek =
01 means the phone will check the
new configuration every Sunday and
Settings->Auto
provision->Day of
week