Yealink T48G Quick Start

Yealink T48G
Quick Start
Tip: You do not need to dial any numerical prefix before dialing an extension or external
number. Simply dial the extension or 10 digit number.
Call Forwarding
1. Tap the Menu softkey*.
2. Select Call Features > Call Forward.
3. Turn on the desired forwarding type.
o Always: Forwards all incoming calls.
o No Answer: Forwards all unanswered incoming calls.
o Busy: Forwards calls that arrive when you’re already in a call.
Note: Call Waiting must be disabled (Menu > Features > Call Waiting) to enable
Call Forward Busy.
4. Enter the internal extension or external number to which calls will be forwarded.
1. If you selected No Answer, enter how many rings to wait before forwarding.
5. Tap the Save softkey*.
To disable call forwarding, turn off the forwarding type.
Tip: While your phone rings, press the Forward softkey* to forward the incoming call to another
person.
Do Not Disturb (DND)
Enabling DND stops your phone from ringing and sends all incoming calls directly to
voicemail. Calls are logged in your Missed Calls.
1. Tap to enable/disable.

Yealink T48G Specifications

General

Wi-Fi	No
Display	7" 800 x 480-pixel color touch screen
Network	Dual-port Gigabit Ethernet
PoE	Yes (IEEE 802.3af)
Audio Features	HD voice: HD handset, HD speaker
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Network Features	SIP v1 (RFC2543), v2 (RFC3261)
Bluetooth	Bluetooth via USB Dongle
USB	1 x USB 2.0
Headset	Yes (EHS support)
Expansion Module	Supports up to 6 modules
Local Phonebook	1000 entries
Power Supply	AC 100~240V input, DC 5V/2A output
Supported Languages	English, French, German, Italian, Polish, Portuguese, Russian, Spanish
Operating Temperature	0 ~ 40°C (+32 ~ 104°F)
Humidity	10% to 95%, non-condensing
Dimensions	266 x 226 x 185 mm