EasyManua.ls Logo

Yealink T41S User Manual

Yealink T41S
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Yealink T41S
Wireless Settings

Other manuals for Yealink T41S

Question and Answer IconNeed help?

Do you have a question about the Yealink T41S and is the answer not in the manual?

Yealink T41S Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Keypad illuminationYes
Wi-FiNo
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume controlDigital
Number of programmable keys6
Lines quantity6 lines
Phonebook capacity1000 entries
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Input frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Display diagonal2.7 \
Display resolution192 x 64 pixels
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
CertificationCE
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Summary

Wireless Network Overview

Connect the Wi-Fi Dongle

Ensure the Wi-Fi USB Dongle WF40 is properly connected to the USB port at the back of your phone.

Activating the Wi-Fi Mode

Screen prompts about Wi-Fi adapter, allowing activation and scanning of wireless networks.

Activating Wi-Fi via Phone User Interface

Navigate Wi-Fi Settings

Access Wi-Fi via Menu > Basic > Wi-Fi and select 'On' using the switch key.

Save Wi-Fi Settings

Press the 'Save' soft key to confirm changes and initiate scanning of available wireless networks.

Connecting to Wireless Network

Manual Connection Steps

Steps to connect to an available network via phone UI, including scanning and entering password.

Wi-Fi Protected Setup (WPS)

Simplified configuration for secure wireless networks using PBC or PIN methods.

Manually Add Wireless Network

Configure WLAN Profile

Use WLAN settings from the gateway/router to configure profile, SSID, and security mode on the phone.

Managing Saved Wireless Networks

View Network Information

Access detailed wireless network information like profile name, SSID, and signal strength.

Edit or Delete Profiles

Options to edit, change priority, or delete saved wireless network profiles.

Disconnecting and Deactivating Wi-Fi

Disconnect Wireless Connection

Steps to disconnect the active wireless network connection via the phone's interface.

Deactivate Wi-Fi Mode

Turns off the Wi-Fi mode on the phone by selecting 'Off' in the Wi-Fi settings.

Related product manuals