Yealink T41S

2
3. Tap the Menu > Basic > Wi-Fi
4. Press or , or the Switch soft key to select On from the Wi-Fi field.
5. Press the Save soft key
The IP phone scans the available wireless networks in your area
There are 3 ways to connect your T41S IP Phone to the wireless network
• Manually connect to an available wireless network
• Wi-Fi Protected Setup (WPS)
• Manually add a wireless network
To manually connect to a wireless network via phone user interface:
1.
2.
Press Menu > Settings > Basic Settings > Wi-Fi
Press o r to X Available Network(s) (X represents the number of available networks),
and then press the Enter soft key.
Yealink T41S Wireless Settings
Activating the Wi-Fi Mode via the phone user interface
Connecting to the Wireless Network
Manually Connect to an Available Wireless Network
3. If there is no available wireless network, press the Scan soft key t
o search for the wireless network again
4. Press or to select the desired wireless network
5. Press the Connect soft key
6. If the Network is secure, enter its password in the Password field
7. Press the OK soft key
Optus Loop – Yealink T41S Wireless Settings QRG
2