Provisioning Yealink Teams IP Phones
9
For more information on how to configure a provisioning server, refer to Configuring a
Provisioning Server.
For more information on how to obtain the provisioning server address, refer to Obtaining the
Provisioning Server Address.
For more information on how to perform the auto provisioning process, refer to Triggering the
Phone to Perform the Auto Provisioning.
If you are not familiar with auto provisioning process on Yealink Teams IP phones, you can refer
to An Instance of Auto Provision Configuration.
An Instance of Auto Provision Configuration
This section shows an instance of auto provision configuration.
1. Manage boot files.
Specify the desired URL (e.g., http://10.82.24.5/y000000000058.cfg) of the configuration
files in the boot file (e.g., y000000000000.boot). For more information, refer to Managing
Boot Files.
2. Manage configuration files.
Add/Edit the desired configuration parameters in the CFG file (e.g., y000000000058.cfg)
you want the phone to download. For more information on how to manage configuration
files, refer to Managing Configuration Files.
To Next Page
Loading...
