Obtaining the Provisioning Server Address
31
editor to check the address, for example, tftp://192.168.1.100/.
Phone Flash
Yealink Teams IP phones support obtaining the provisioning server address from the phone
flash. To obtain the provisioning server address by reading the phone flash, make sure the
configuration is set properly.
To configure the phone flash via web user interface:
1. Click on Settings->Auto Provision.
2. Enter the URL, user name and password of the provisioning server in the Server URL,
User Name and Password fields respectively (the user name and password are optional).
3. Click Confirm to accept the change.
After the above configuration is completed, the phone will connect to the configured
provisioning server and perform the auto provisioning process by one of the following
methods: Power On, Repeatedly, Weekly, Auto Provision Now and Multi-mode Mixed. For more
information on these methods, refer to Triggering the Phone to Perform the Auto Provisioning.
To Next Page
Loading...
