Yealink T58A

Triggering the Phone to Perform the Auto Provisioning
33
Triggering the Phone to Perform the Auto
Provisioning
This chapter introduces the following methods to trigger the Teams IP phone to perform the
auto provisioning process:
 Power On
 Repeatedly
 Weekly
 Auto Provision Now
 Multi-mode Mixed
Power On
The phone performs the auto provisioning process when the phone is powered on.
To activate the power on mode via a web user interface:
1. Click on Settings->Auto Provision.
When there is an active call on the phone during auto provisioning, the auto provisioning
process will detect the call status every 30 seconds. If the call is released within 2 hours, the auto
provisioning process will be performed normally. Otherwise, the process will end, due to
timeout.