| Hybrid Mode Settings | 69
5. Enter the paging group name in the Label field.
6. Save the change.
Setting a Paging Group
Procedure
1. Tap the avatar in the top-right corner of the screen, go to Settings > Device Settings > Paging List.
2. Select the desired paging group.
The default tag is Empty if it is not configured before.
3. Enter the multicast IP address and port number (for example, 224.5.6.20:10008) in the Address field.
4. Enter the string that will display on the phone screen in the Label field.
5. Select the desired channel between 0 and 30 in the Channel field.
6. Save the change.
Editing a Paging Group
You can edit the information of the paging group.
Procedure
1. Tap the avatar in the top-right corner of the screen, and go to Settings > Device Settings > Paging
List.
To Next Page
Loading...
