What is the noise interference issue on my Yealink Conference System?
Noise devices, such as computers or fans, may make it difficult to hear each other's voices clearly on Yealink Conference System.
What causes intermittent voice issues on my Yealink VC?
If you're experiencing intermittent voice issues with your Yealink Conference System, this is probably caused by voice packet loss or jitter.
What is the audio pickup device movement issue on my Yealink VC Conference System?
The audio pickup device is moved frequently of Yealink Conference System.
Why is the voice quality poor during a call on my Yealink VC?
If you're experiencing poor voice quality during a call with the Yealink Conference System, it could be due to intermittent voice, low volume, echo, or other noise.
Why shouldn't I unplug the power adapter to power off my Yealink VC?
To avoid corrupting the system, you should not unplug the power adapter from the system to power off the Yealink Conference System.
How to resolve high indoor light interference on my Yealink VC Conference System?
Avoid high-intensity indoor light or direct sunlight on the camera of Yealink Conference System.
What is the microphone positioning issue on my Yealink VC Conference System?
Users sit too far from or near to the microphone of Yealink Conference System.
What does LINK failure mean on the Yealink VC?
the icon will appear on the status bar of the display device, indicating the current network is not available.
General| Brand | Yealink |
|---|---|
| Model | VC Series |
| Category | Conference System |
| Language | English |
Describes the method for hanging the camera on TVs with thickness less than 120mm.
Details network configuration requirements for the head office, including static IP addresses.
Steps to configure a static IP address for the VC400/VC120 via remote control.
Instructions for mapping firewall ports for Intranet deployment of the VCS.
Provides two options for deploying the VCS in a branch office environment.
To Next Page
