Do not pick up the bracket which connects with
an endpoint, the endpoint may fall down
in this situation.
Mount on a Wall
The recommended height is 1.55m-1.85m above the ground.
Steps：
1
3
2
4
3
Push the bracket along the track of the endpoint to an appropriate location.
Stick a Velcro onto the bracket.
Remove one Velcro.
Put the bracket on the top of the TV.
Stick a Velcro onto the back of the TV, and make sure that the bracket and the back of the TV are tightly positioned against
each other.
5
3
Please choose the following installation method when the thickness of the TV is between 37mm and 77mm.
TV
Pay attention to the direction of the bracket
4
5
3
1
2
X
If your endpoint cannot be mounted on the top of a
TV when the bracket has reached the edge of the
endpoint, choose other installation methods.
48mm
Hole diameter: 6mm
Hole depth: 30mm
Screw specification: T4×30
2
1
300mm
To Next Page
Loading...
