Yealink VC880 User Manual (English)

Other manuals for Yealink VC880

User Guide104 pages

Administrator's Guide242 pages

Questions and Answers:

D
donald96Sep 1, 2025
What to do if I may experience poor voice quality during a call on Yealink VC880?
- A
  Andrew HowellSep 1, 2025
  If you experience poor voice quality during a call on your Yealink Conference System, such as intermittent voice, echo, or other noise: * Adjust the distance between users and the microphone; avoid being too far or too near. * Keep the audio pickup device in a fixed location to prevent frequent movements. * If there is network congestion, contact the network administrator. * Replace old cables with new ones to improve connectivity.
K
Kayla SharpAug 31, 2025
Why can't I hear audio clearly during a call on my Yealink VC880?
- B
  Brian AdamsAug 31, 2025
  If you cannot hear the audio clearly during a call on your Yealink Conference System: * Adjust the speaker volume if it is too low. * If the audio from the far site is muffled, advise them to speak closer to their phone, as highly reverberant rooms can cause this issue. * Adjust the priority order of your audio codec if you've chosen a low-bandwidth one. * Enable noise suppression to reduce interference from devices like computers or fans. * Clean the phone with a soft, slightly damp cloth, as dust and debris can affect audio quality. Avoid liquid or aerosol cleaners.
S
Sandra TurnerAug 30, 2025
What to do if I cannot share content from Yealink VC880 Conference System?
- C
  Catherine ThompsonAug 30, 2025
  If you cannot share content from your Yealink Conference System: * Ensure a PC is connected to your system and turned on. * If using a VCH50 video conferencing hub or WPP20 wireless presentation pod, check if it's broken and replace it if necessary. * If using a WPP20, ensure it can connect to the video conferencing system to obtain a Wi-Fi profile, and verify that the wireless AP feature of the video conferencing system is enabled.
L
larrygreenAug 28, 2025
What to do if far site cannot hear my audio during a call using Yealink VC880 Conference System?
- C
  colesarahAug 28, 2025
  If the far site cannot hear your audio during a call on your Yealink Conference System: * Ensure the audio input device is connected correctly. * Make sure the speaker at the far site is not obscured or damaged; do not stack items on top of the conference phone. * Check that your microphone is not muted and unmute it, if necessary. * Ask the far site to check if their volume is set to 0 and adjust it.
A
Amy WalkerAug 27, 2025
How to prevent monitor burn-in on my Yealink VC880?
- A
  Amy GilbertAug 27, 2025
  To prevent monitor burn-in on your Yealink Conference System: * Avoid displaying static images for extended periods, including meetings that last over an hour without much movement. Configure the automatic sleep time or use a screen saver. * If the monitor's sharpness, brightness, and contrast are set to maximum values, consider decreasing them.
J
Jay WaltersAug 26, 2025
What to do if the video quality is poor on Yealink VC880 Conference System?
- N
  Natalie RyanAug 27, 2025
  If the video quality on your Yealink Conference System is poor, it could be due to: * An unsuitable monitor resolution. * Packet loss; view the call statistics to check for packet loss and contact the network administrator. * Unsuitable camera parameters; adjust the brightness and white balance. * High-intensity indoor light or direct sunlight on the camera; avoid these situations.
J
Jacob DavisAug 25, 2025
Why does my Yealink VC880 not respond to the remote control?
- T
  Tracy RamseyAug 25, 2025
  Your Yealink Conference System might not be responding to the remote control due to several reasons: * The remote control battery may be dead, so replace the batteries. * The batteries might be installed incorrectly; ensure they are correctly installed. * You might be aiming the remote control in the wrong direction; aim it at the sensor. * You may be trying to control the far-site camera; ensure you are controlling the near-site camera. * Something may be obstructing the sensor on the front of the camera; make sure nothing is in the way. * The remote control itself may be broken, in which case you should replace it.

Yealink VC880 Specifications

General

Pan range	100 - 100 °
Product type	Multipoint Control Unit (MCU)
Product color	Silver
Tilt angle range	30 - 30 °
Number of persons	24 person(s)
Dual stream	: H.239 (H.323)/BFCP (SIP), FECC: H.224/H.281, Sony VISCA and PELCO D/P
Video codecs	H.265/HEVC, H.264 High Profile, H.264, H.263, H.263+
Total megapixels	- MP
Maximum frame rate	60 fps
Video formats supported	H.263+, H.264, H.265, Sorenson H.263
Frequency range	8 - 4800 Hz
Echo cancellation	Yes
Audio formats supported	G.711, G.722.1
Sensor type	-
Optical zoom	12 x
Image sensor size	- \
Field of view (FOV) angle	100 °
Wide end viewing angle (normal mode)	30 °
Built-in display	No
Phono inputs (RCA)	2
HDMI ports quantity	3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Current	0.7 A
AC input voltage	100 - 240 V
DC input voltage	48 V
Power consumption (max)	21 W
Power consumption (typical)	16 W
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Ethernet LAN data rates	10, 100, 1000 Mbit/s