Yealink W52H How To Configure

2/28/2019 Provisioning a Yealink DECT W52P/W56P with the 3CX v15
https://www.3cx.com/sip-phones/yealink-dect-w52p/ 1/4
How to configure Yealink W52P/H, W56P/H, W60P/B
for 3CX
This guide applies to v15 SP4 and higher.
On this topic
How to configure Yealink W52P/H, W56P/H, W60P/B for 3CX
Supported Models: Yealink DECT series and Handsets
Base Station
Handset Station
Step 1: Upgrade to the Required firmware
Step 2: Factory Reset the Yealink Dect system
Step 3: Provisioning a Yealink WP station
Remote STUN
SBC
Step 4: Registering the handset
Known Limitations
Supported Models: Yealink DECT series and Handsets
Base Station
● Yealink W52P
● Yealink W56P
● Yealink W60P/B
Handset Station
● Yealink W52H
● Yealink W53H

Yealink W52H Specifications

General

Resolution	128 x 160 pixels
Standby Time	Up to 120 hours
Headset Port	3.5 mm
Range	Up to 50 meters indoors, 300 meters outdoors
Power Saving Mode	Yes
Display	1.8" color display
Battery	Lithium-ion battery
DECT Standards	DECT, GAP
Codecs	G.726, G.722, G.711, G.729
Power Supply	5V DC
Dimensions (Handset)	144 mm x 51 mm x 24 mm
Operating Temperature	0° to +40°C
Humidity	10% to 90% (non-condensing)
Phonebook	Up to 500 contacts