Yealink W52P How To Configure

2/28/2019 Provisioning a Yealink DECT W52P/W56P with the 3CX v15
https://www.3cx.com/sip-phones/yealink-dect-w52p/ 4/4
1. Set the “Provisioning Method” to “3CX SBC (remote)”
2. Enter the local IP address of 3CX Session Border Controller in the remote network and the SIP Port
used by the SBC (default:5060)
Note: The 3CX SBC must be installed on a computer in the remote location. For more information click on
Using 3CX SBC Windows and Linux.
Step 4: Registering the handset
Read the following guides on how to connect handsets to your base: https://www.3cx.com/sip-
phones/register-yealink-handsets/
Known Limitations
● No Alert Info
● No BLF
● No CTI
● No support for Paging Groups (incl. Multicast)
● Cannot park on shared parking spaces (SP0), only in parking orbit (*00)
● In STUN provisioning assign a minimum of 12 RTP ports

Yealink W52P Specifications

General

Caller ID	Yes
Lines quantity	- lines
Answering machine	No
Phonebook capacity	500 entries
Handset type	Wireless handset
Product type	IP Phone
Product color	Black
Maximum indoor range	50 m
Maximum outdoor range	300 m
Voice codecs	G.711, G.723, G.726, iLBC
Number of melodies	9
Display diagonal	1.8 \
Display resolution	128 x 160 pixels
Headset connectivity	2.5 mm
Ethernet LAN (RJ-45) ports	1
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Standby time	100 h
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	108 mm
Width	153 mm
Height	45 mm
Height (max)	50 mm
Height (min)	144 mm