a per-line basis via web user interface:
Click on Account -> Codec.
5. Optimized the call display features.
Description:
(1) You can enable or disable the handset to display the called account
information when receiving an incoming call.
(2) You can specify the call information display method when the handset
receives an incoming call, dials an outgoing call or is during an active call. IP DECT
phones support five call information display methods: Name+Number,
Number+Name, Name, Number and Full Contact Info.
To configure call display features via web user interface:
Click on Setting -> Call Display
6. Optimized the display method on dialing.
Description: When the handset is on the pre-dialing or dialing screen, the
account information will be displayed on the top of the LCD screen.
You can customize the account information to be displayed on the handsets as
To Next Page
Loading...
